You’ve brought your generator out of storage,filled the tank,pulled the cord,and absolutely nothing. Prior to attempting any repair work,get rid of the spark plug to avoid accidental starting while you are working on the unit.

Inspect the muffler exhaust for any foreign debris if the generator will not start or won’t stay started. When that is tidy,examine the gas and oil to ensure you have suitable levels of both. Make sure the spark plug has an excellent connection and is clean.

It may be running at too low of a speed if the generator does not produce electricity. Change the rpm. This can likewise result from a malfunctioning capacitor or windings,which should be changed and tightened.

If the voltage is running high without any load on the generator,you may require to change the rpms to a lower speed or replace the capacitor. Alternatively,if the voltage is running low under no load,you may require to change the rpms to a higher speed or replace the capacitor with one with a higher ranking. In addition,for low voltage,you should examine your winding resistance and replace your rotary diodes,if needed.

If your voltage is ok without any load,but drops when you include a small load,you may require to increase your rpms or get rid of some of the load. You could likewise require to replace your rotary diodes.

You most likely require to change the rpms or get rid of some of the load if the voltage drops when you include a high load.

Finally,if the voltage changes,it may be the outcome of unclean or loose connections. You may likewise require to regulate the rpms to solve this problem. If all else fails call these guys: -

Summarizing

If the voltage is running high with no load on the generator,you may require to change the rpms to a lower speed or replace the capacitor. Alternatively,if the voltage is running low under no load,you may require to change the rpms to a higher speed or replace the capacitor with one with a higher ranking. In addition,for low voltage,you should examine your winding resistance and replace your rotary diodes,if needed.